Current Transformers

Closed core balance transformers type A

DIFFERENTIAL EARTH FAULT CORE BALANCE TRANSFORMER - DEDICATED TO DIRIS DIGIWARE R-60 AND RESYS

Residual core transformers, including the active conductors, establish the differential sum of the vector currents to detect leakage currents.

Closed ∆IC series models, these core transformers are suitable for all wiring configurations in new and existing systems. Mounted on a DIN rail, plate or straight on the cable, these residual CTs adapt to any setup constraints for easier and faster wiring. You need core balance transformers to implement differential relay protective or signalling units.

Fault‑locating core balance transformers

CORE BALANCE TRANSFORMER - CONNECTS TO ISOM DIGIWARE F-60 MODULES

You need core balance transformers to install fault detection and locating units. These enclose the active conductors and highlight earth fault currents

Socomec core balance transformers meet measurement sensitivity needs and are suitable for ISOM Digiware locating systems. Closed (ΔIP, WR and TFR series) or split (ΔIP-R series), both types are suitable for all wiring configurations.

The use of the ISOM T-15 adapter is required to connect the core balance transformers to ISOM Digiware F-60.

Split‑core core balance transformers type A

DIFFERENTIAL EARTH FAULT CORE BALANCE TRANSFORMER - DEDICATED TO DIRIS DIGIWARE R-60 AND RESYS

Residual core transformers, including the active conductors, establish the differential sum of the vector currents to detect leakage currents.

Residual core transformers, including the active conductors, establish the differential sum of the vector currents to detect leakage currents.

Closed ∆IP-R series models, these core transformers are suitable for all wiring configurations in new and existing systems. Mounted on a DIN rail, plate or straight on the cable, these residual CTs adapt to any setup constraints for easier and faster wiring.

You need core balance transformers to implement differential relay protective or signalling units.

Core balance transformers type B

SPECIAL TYPE B CORE BALANCE TRANSFORMERS - FOR RESYS B420 AND ISOM DLRD

To detect DC and AC faults

Split‑core core balance transformers type A

DIFFERENTIAL EARTH FAULT CORE BALANCE TRANSFORMER - DEDICATED TO DIRIS DIGIWARE R-60 AND RESYS

Residual core transformers, including the active conductors, establish the differential sum of the vector currents to detect leakage currents.

Closed ∆IP-R series models, these core transformers are suitable for all wiring configurations in new and existing systems. Mounted on a DIN rail, plate or straight on the cable, these residual CTs adapt to any setup constraints for easier and faster wiring.

You need core balance transformers to implement differential relay protective or signalling units.

Core balance transformers type B

SPECIAL TYPE B CORE BALANCE TRANSFORMERS - FOR RESYS B420 AND ISOM DLRD

To detect DC and AC faults

Metal mounting bracket

ACCESSORIES - FOR ΔIP AND ΔIP-R CORE BALANCE TRANSFORMERS

Core balance transformer metal mounting bracket.

DIN rail fixing kit for core balance transformers

ACCESSORIES - FOR ΔIP AND ΔIP-R CORE BALANCE TRANSFORMERS

Accessories for core balance transformers ΔIP and ΔIP-R

Cable locator

ACCESSORIES - FOR ΔIC AND ΔIP-R CORE BALANCE TRANSFORMERS

To centre the cables in the core opening. Use this accessory to attach the core balance transformer directly onto the cables.